Enter current volume label for drive
- 1 What does “Enter current volume label for drive C” mean?
- 2 Enter Current Volume Label for Drive| How to Find the Volume Label?
- 2.1 Need to enter current volume label for drive
- 2.2 How to find a volume label for a drive?
- 2.3 Way 1. Find volume label from Command Prompt
- 2.4 Way 2. View volume name in Windows Explorer
- 2.5 What if “An incorrect volume label was entered for this drive” occurs?
- 2.6 Can you convert FAT32 to NTFS or format partition without typing volume label?
- 2.7 A. Convert FAT32 to NTFS for external drive
- 2.8 B. Format C drive easily
What does “Enter current volume label for drive C” mean?
Create, manage, rename, merge, and delete your partitions safely and effortlesly with this amazing tool.
- Open This PC.
- List of all available drives will now appear. If you have a label assigned to your storage device, you should easily see it.
In our case, SanDisk was the label assigned to our storage device.
Remove PC Errors
Run a PC Scan with Restoro Repair Tool to find errors causing security problems and slowdowns. After the scan is complete, the repair process will replace damaged files with fresh Windows files and components.
Disclaimer: to remove errors, you need to upgrade to a paid plan.
If you want to modify your volume label, simply do the following:
- Right click the drive that you want and choose Properties from the menu.
- Go to General tab. First field should represent your label. If you want, you can easily change it and click Apply and OK to save changes.
You can easily assign any label to your storage device simply from This PC.
3. Use CommandPrompt
- Press Windows Key + X to open Win + X menu and choose Command Prompt (Admin).
- When Command Prompt opens enter F: and press Enter.
- We used F: because that’s the letter of our storage device, but you’ll have to use the letter that represents your storage device.
- After your current directory changes to F: drive, simply enter dir and press Enter to list the contents of that directory.
- At the top you should see Volume in drive F is message that tells you the volume label of your storage device.
- Optional: You can make this process even more simpler by entering the vol F: command as soon as the Command Prompt opens.
- Be sure to replace F with the letter that matches your storage device.
If you need to find your volume label, you can use Command Prompt.
Finding your volume label with Command Prompt might be a bit more complex, but in some cases, you might have to completely rely on Command Prompt and use it to make changes to your hard drive.
Now that you know how to find your disk label, you should be able to fix the Enter current volume label for drive C message. According to users, you just need to enter your volume label when this problem occurs and press Enter.
If you don’t have a volume label assigned, you can simply leave it blank and press Enter. According to users, this error mostly occurs when you’re trying to convert FAT32 drive to NTFS drive using convert command in Command Prompt.In some rare cases this message can appear if your volume label is corrupt, and if that’s the case, you might have to reformat that partition in order to fix this error.
Keep in mind that formatting your partition will delete all files from it, therefore be sure to create a backup. To format your partition using Command Prompt, do the following:
- Open Command Prompt as administrator.
- When Command Prompt opens, enter diskpart and press Enter.
- Now you need to select your hard drive.
- To do that, enter list disk and list of all available hard drives and storage devices will appear.
- Judging by the size, locate the hard drive that you want to use and enter select disk x.
- Replace x with the appropriate number.
- Enter list partition to list all available partitions on that hard drive.
- Enter select partition x to select an appropriate partition.
- After that, enter format fs=ntfs quick label=your_label.
- You can replace your_label with any label that you want to use for that partition.
- Press Enter and the formatting process will now start.
We have to warn you that diskpart is an extremely powerful tool and almost all changes performed with this tool are irreversible, therefore use extra caution and make sure to double check everything before proceeding.
Another way of format your partition is to open This PC and use the format option. To do that, follow these steps:
- Open This PC, locate the partition you want to format, right click it and choose Format from the menu.
- Select the File system that you want to use, enter Volume label and press Start.
Once again, formatting will remove all files from a certain partition, so be sure to back them up before you proceed.
Enter current volume label for drive is usually not an error, and in most cases you just need to find your volume label and enter it in order to proceed. If your volume label is corrupted for some reason, you might have to format your partition in order to fix this problem.
Editor’s Note:This post was originally published in October 2017 and has been since revamped and updated in August 2021 for freshness, accuracy, and comprehensiveness.
Still having issues? Fix them with this tool: This software will repair common computer errors, protect you from file loss, malware, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove viruses now in 3 easy steps:
- Download this PC Repair Tool rated Great on TrustPilot.
com (download starts on this page)
- Click Start Scan to find Windows issues that could be causing PC problems.
- Click Repair All to fix issues with Patented Technologies (Exclusive Discount for our readers).
- Restoro has been downloaded by 0 readers this month.
Editor's Note: This article was originally published in October 2017 and was revamped and updated in September 2021 for freshness, accuracy, and comprehensiveness.
Enter Current Volume Label for Drive| How to Find the Volume Label?
1. Need to enter current volume label for drive
2. How to find a volume label for a drive?
3. What if “An incorrect volume label was entered for this drive” occurs?
4. Can you convert FAT32 to NTFS or format partition without typing volume label?
Need to enter current volume label for drive
You need to input current volume label for drive, when you receive the message “Enter current volume label for drive X (x refers to the drive letter of the drive to which you’re making write operation)”. This message can appear in Command Prompt under various situations. There are two cases:
▐ Case 1: “I have a 500 GBWD external hard drive formatted with FAT32 and I need to convert it to NTFS.” It shows up in Windows Explorer as Local Drive E:. After I inputted convert e: /fs:ntfs in Command Prompt, I was asked to enter the current volume label for drive E. What does the “current volume label” mean? How to get it?”
▐ Case 2: “I want to format system boot drive (C drive) from Command Prompt using the Windows 7 recovery USB that I have created. But when I after typing “format c: /fs:ntfs”, I received an message saying that “Enter current volume label for drive C:. What is volume label? How can I find the volume label for partition C?”
How to find a volume label for a drive?
Volume label (volume name) is a unique name that assigned to a drive, which is not essential for a drive. Usually, you label a drive to make it distinguish from others drives, thus you won’t make write operation to inappropriate drive.
Since you need to enter the current volume label of a drive, you should gain the value label at first. To find out a volume label of a partition in Windows, you can pick up one among the following three methods as you .
Way 1. Find volume label from Command Prompt
After accessing Command Prompt, you can run “vol x:“ to list the volume label for drive X. x refers to the drive letter assigned to the drive whose volume label needs being displayed. This screenshot takes finding out volume label for drive C as an example:
Here you can see that the current volume label of partition C is Windows.
PS.: If there is no volume label of the partition that you want to format, you just hit Enter to continue the operation.
Way 2. View volume name in Windows Explorer
Or you can check out the volume label of a partition from Windows Explorer by following the steps given below:
1. Open Windows Explorer by double-clicking This PC in Windows 10 or My Computer in Windows 7.
2. Locate the drive (here is Drive E:) whose volume label is necessary to complete your operation, right-click it and choose Properties.
3. In the Prosperities window, you can see the volume label of this drive is located behind the drive icon (The volume label of Drive E is Data).
4. After getting the volume label of external drive E:, you can enter the current volume of drive E when converting it from FAT32 to NTFS and complete the conversion.
What if “An incorrect volume label was entered for this drive” occurs?
Usually, after you enter current volume label for drive, the operation can continue. However, there are chances that you can get an error message reporting that an incorrect volume label was entered for this drive. If you are encountered such error, what should you do?
Firstly, you should confirm whether you really type a wrong volume name for your drive. Some users might consider the capacity of drive as its volume label. To find right one, you can refer to the methods aforementioned.
If you ensured that you have typed the right one but the error still appears, you can change volume label of the drive from Windows Explorer.
Can you convert FAT32 to NTFS or format partition without typing volume label?
If you think it’s a lit bit troublesome to find out and enter current volume label for drive when you make FAT32 to NTFS conversion or format C drive from Command Prompt, you can employ a free and great GUI partition manager – AOMEI Partition Assistant Standard, allows you make operations without efforts.
It enables you to convert FAT32 to NTFS without formatting for an external hard drive, USB flash drive, SD card, etc. And it can convert a drive back to FAT32 without formatting as well.
It has Make Bootable Media wizard, allow you to create a Windows bootable USB or CD/DVD. Then you insert it to your computer, enter BIOS to boot Windows from this USB or CD/DVD and format C drive.
Now, free download it and have a look at how it works:
A. Convert FAT32 to NTFS for external drive
Step 1. Install and run the software, right-click the partition that you need to convert and choose Convert to NTFS.
Step 2. Click OK to continue the operation.
Step 3. Confirm the operation and click Apply to commit it.
B. Format C drive easily
Step 1. Insert a USB flash drive to your computer. Install and run the software. Click Make Bootable Media and follow the next prompts to create a Windows bootable USB drive.
PS.: Please back up all necessary files on USB drive as this operation will erase all data on it.
Step 2. Reboot your computer and enter BIOS to boot from USB drive.
Step 3. Then, you’ll be on home interface of AOMEI Partition Assistant. Right-click partition C and choose Format Partition to format C drive.
Note: You can enjoy more functions, such as converting system disk from MBR to GPT without data loss, cloning MBR disk to GPT SSD and so on, if you upgrade AOMEI Partition Assistant Standard to Professional version.